Excursion 2WD V10-6.8L VIN Z CNG (2003)
Ring Gear: Specifications
Rear Drive Axle/Differential - Dana S110
Differential ring gear to pinion backlash b ...................................................................................................................... 0.15 - 0.46 mm (0.06 - 0.018 inch)
b The acceptable backlash tolerance is + 0.0508 mm (0.002 inch) from the backlash etched in the differential ring gear. The tooth contact pattern can
move only by adjusting backlash. The tooth contact pattern can move only in the direction of heel-to-toe, and toe-to-heel. Depth of the tooth contact
pattern is not adjustable.