Excursion 2WD V10-6.8L VIN Z CNG (2003)
Axle Shaft: Service and Repair
Dana Model 80 Full-Floating Rear Drive Axle
Removal and Installation
Axle Shaft
Removal and Installation
1. Set the parking brake.
2. Remove the axle shaft bolts.
^
Place a drain pan under the rear hub.
3. Remove the axle shaft.
4. Inspect the following components:
^
The O-ring for damage. Replace as necessary.
^
The axle shaft for cracked material around the holes or oversized holes. Replace as necessary.
