Excursion 2WD V8-5.4L SOHC VIN L (2000)
Heavy Duty Riveter
SPECIAL SERVICE TOOL(S)
REMOVAL
1. Remove the cargo door trim panel.
2. Position the watershield aside.
3. Disconnect the exterior door handle actuating rod.
1
Open the locking clip.
2
Disconnect the actuating rod.
4. Remove the exterior door handle.
1
Remove the rivets.
2
Remove the handle.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Use the special tool to install the new rivets.
