Excursion 2WD V8-5.4L SOHC VIN L (2000)
2. Remove the nuts.
INSTALLATION
1. Release the tension on the push nuts to allow the cushion studs to move freely.
2. Disassemble the seat cushion. For additional information, refer to Seat Cushion-Excursion, Second Row, 60 Percent.
3. Position the seat cushion to the seat riser, then loosely install the nuts.
4. Align the cushion frame to the sheer pins.
NOTE: Make sure the sheer pins are centered in the holes of the cushion frame.
