Excursion 2WD V8-5.4L SOHC VIN L (2000)
2. Install the seat riser.
^
Install the nuts.
3. Install the safety belts.
^
Using the special tool, install the bolts.
4. Install the seat cushion trim cover onto the seat cushion foam.
5. Install the seat cushion frame into the seat cushion trim cover and foam.
^
Connect the J-clips.
6. Check the restraint system for correct operation.
Heated Front Seat Cushion
DISASSEMBLY
1. Remove the seat. For additional information, refer to Seat-Captain's Chair.
2. Remove the seat cushion. For additional information, refer to Front Seat Cushion-Excursion, Heated Seat.
3. Remove the bolt.