Excursion 2WD V8-5.4L SOHC VIN L (2000)
4. Remove the seat handle clip and handle.
5. Remove the spring pin and screw.
6. Remove the seat backrest cable retaining clip and the cable.
7. Position the upholstery and pad, then remove the bolts.
INSTALLATION
1. To install, reverse the removal procedure.
Seat Cushion Release, 60 Percent Seat
REMOVAL
1. Remove the seat. For additional information, refer to Seat-Excursion, Second Row.
2. Remove the seat cushion. For additional information, refer to Seat Cushion-Excursion, Second Row, 60/40.
3. Disassemble the seat cushion. For additional information, refer to Seat Cushion-Excursion, Second Row, 60 Percent.
