Excursion 2WD V8-5.4L SOHC VIN L (2000)
Clean and inspect the mating surface.
2. Using the Rear Crankshaft Seal Replacer and the Rear Crankshaft Seal Adapter, install the crankshaft rear oil seat.
3. With the Rear Crankshaft Seat Adapter still installed, use the Rear Crankshaft Slinger Replacer and the Rear Crankshaft Seat Replacer to install
the rear main seal slinger.
4. Install the flywheel.
5. Connect the battery ground cable.