Excursion 2WD V8-5.4L SOHC VIN L (2000)
11. Attach the restraint system diagnostic tool (418-F088) to the vehicle harness side of the passenger air bag module electrical connector.
12. Install the ECS module fuse F22 (10A) to the CJB and install the cover. Install the BJB ECS module fuse F2 to the BJB and install the cover.
13. Connect the battery ground cable.
Reactivation Procedure
1. At the CJB, located below the LH side of the instrument panel, remove the cover and the ECS module fuse F22 (10A). At the battery junction box,
located in the engine compartment, remove the cover and the ECS module fuse F2 (10A).
2. Disconnect the battery ground cable and wait at least one minute.