Excursion 2WD V8-5.4L SOHC VIN L (2000)
Clutch Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Disconnect the electrical connector from the Clutch Pedal Position (CPP) switch.
3. Release the CPP from the orientation clip.
4. Remove the plastic retainer.
1
Push the lock tabs together.
2
Slide the plastic retainer off the CPP switch.
5. Remove the CPP switch.
INSTALLATION
1. To install, reverse the removal procedure.
