Excursion 2WD V8-5.4L SOHC VIN L (2000)
6. Install the third row safety belt guide.
1
Position the safety belt guide.
2
Using the special tool 501-010 (T77L-2100-A), install the bolt.
3
Reposition the safety belt guide cover.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
7. Install the second row safety belt guide.
1
Position the safety belt guide.
2
Install the nut.
3
Close the safety belt guide cover.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
8. Remove the shipping clip(s) from the safety belt retractor(s).