Excursion 2WD V8-5.4L SOHC VIN L (2000)
^
Install the Tan/White wire into Pin 10 of the headlamp switch electrical connector. See Figure 7.
^
Install the White/Red wire into Pin 11 of the headlamp switch electrical connector. See Figure 7.
^
Install the locking wedge into the headlamp switch electrical connector.
4.
Connect and install the new headlamp switch assembly.
5.
Connect the battery negative cable, then remove the memory saver.
SERVICE PROCEDURE - DEALER STOCK AFTER PRE-DELIVERY OR CUSTOMER DELIVERED VEHICLES
1.
Discard the original headlamp switch assembly.
2.
Modify the wiring of the headlamp switch electrical connector as follows:
