Excursion 2WD V8-5.4L SOHC VIN L (2000)
6. Assemble the differential pinion shaft lock pin. Peen the metal of the differential case over the differential pinion shaft lock pin in two places, 180
degrees apart, to lock it in place. Note the location of the slot in the differential pinion shaft lock pin and peen it 90 degrees apart.
All differentials
7. Note:
^
Align the tab on the anti-lock speed sensor ring with the slot in the differential case.
^
Apply Threadlock(R) and sealer EOAZ-19554-AA or equivalent meeting Ford specification WSK-M2G351-A5 to the new bolts.
Align the tab in the anti-lock speed sensor ring with the slot in the differential case. Start the two bolts through the differential case flange and into
the differential ring gear to make sure the differential case and the differential ring gear bolt hole align.
