Excursion 2WD V8-5.4L SOHC VIN L (2000)
2. Remove the ring gear bolts.
3. Note: The anti-lock speed sensor ring cannot be reused once removed.
Insert a punch in the bolt holes and drive the ring gear off.
^
If necessary, remove the anti-lock speed sensor ring and discard it.
4. If the differential bearings require removal, refer to Differential Case.
5. Note: This tool does not have the 1/2-inch drive hole.
Position the Traction-Lok Torque Tool Set in a vise.
6. Position the differential case on the Traction-Lok Torque tool Set.
