Excursion 2WD V8-5.4L SOHC VIN L (2000)
10. Using the special tool, install the pinion seal.
^
A rotational torque of 1.6947 - 5.0841 Nm (15 - 45 inch lbs.) is acceptable with the pinion seal installed.
11. Using the special tool, install the pinion flange.
12. Apply Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford specification WSK-M2G349-A1 to the pinion threads, and install a
new hex nut.
^
Using a suitable torque multiplier, tighten the nut
13. Assemble the carrier.
