Excursion 2WD V8-5.4L SOHC VIN L (2000)
5. Note: Lightly lubricate all of the mating surfaces with clean axle lubricant. This will aid in assembly and provide initial lubrication.
On the conventional differential, install the gear assembly.
1. Position the thrust washer and the differential side gear into the case half.
2. Position the differential cross shaft with the pinion mates and the thrust washers into the case half.
3. Position the differential side gear and thrust washer on the differential pinion mates.
6. CAUTION: Align the match marks.
On the conventional differential, assemble the differential case halves.
7. CAUTION: Do not damage the differential ring gear and pinion.
Using the special tool, carefully position the differential subassembly into the carrier.
8. CAUTION:
^
The bearing cups must seat on the differential side bearings.
^
Align the match marks.
