Excursion 2WD V8-5.4L SOHC VIN L (2000)
4. Remove and discard the driveshaft slip yoke boot.
5. Check the lubricant for contamination. If the lubricant feels gritty, clean and inspect the stub shaft and driveshaft slip yoke for wear. Replace as
necessary.
Assembly
1. Fill the driveshaft slip yoke boot with approximately 10 grams (0.36 ounce) of Premium Long-Life Grease XG-1-C or equivalent meeting Ford
specification ESA-M1C75-13.
2. Position the driveshaft slip yoke boot clamp onto the stub shaft.
