Excursion 2WD V8-5.4L SOHC VIN L (2000)
4. CAUTION: Keep the hub centered on the spindle to prevent damage to the grease seal or spindle threads.
Place the inner bearing cone and roller assembly in the inner cup and install the wheel bearing hub seal, using a suitable seal replacer. Make sure
seal is fully seated and lubricated.
5. Install the rotor and hub assembly.
6. Install the outer bearing cone and roller assembly and the flatwasher on the spindle.
7. Install the adjusting nut, refer to Wheel Bearing Adjustment - Motorhome for final bearing adjustment. Install a new cotter pin.
