Excursion 4WD V10-6.8L (2002)
Rear Door Striker: Adjustments
NOTE: Before carrying out the striker adjustment, refer to Striker Pre-Adjustment Inspection.
1. Loosen the striker retaining bolts.
NOTE: Scribe before removing.
2. Adjust the door striker and tighten the striker retaining bolts.
3. To install, reverse the removal procedure.
Striker Pre-Adjustment Inspection
1. Verify if the door springs upward while opening.
^
If the door striker is adjusted too low, adjust the door striker.
^
If the door latch is binding or sticking, lubricate the door latch. Refer to Specifications.
2. Verify if the door springs outward excessively while opening.
^
If the door striker is adjusted too far inboard, adjust the door striker.