Excursion 4WD V10-6.8L (2002)
10. Connect the five LH fuel injector electrical connectors and five LH ignition coil connectors.
11. If equipped, install the EVR solenoid bracket.
^
Position the bracket.
^
Install the bolts.
12. NOTE: The idle air control valve is shown removed for clarity.
Install the throttle body adapter.
^
Position a new throttle body adapter gasket.
^
Position the throttle body adapter.
^
Install four bolts and tighten in two stages.
^
Stage 1: Tighten to 9 Nm (80 inch lbs.).
^
Stage 2: Tighten an additional 85-95 degrees.
