Excursion 4WD V10-6.8L (2002)
Expansion Valve: Service and Repair
Auxiliary Climate Control
REMOVAL
1. Recover the refrigerant.
2. Remove the access panel from the RH rear quarter trim panel.
3. Remove the jack.
4. Remove the A/C lines from the A/C evaporator expansion valve.
1
Disconnect the A/C lines from the A/C evaporator expansion valve.
2
Disconnect the A/C evaporator expansion valve from the A/C evaporator core.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B.
2. Evacuate, leak test and charge the A/C system.