Excursion 4WD V10-6.8L (2002)
5. Remove the two bolts and the EGR valve.
^
Discard the gasket.
INSTALLATION
1. Carefully clean both sealing surfaces.
^
Install a new gasket
NOTE: The EGR valve sealing surfaces are soft metals.
2. Install the EGR valve (if equipped).
^
Tighten the bolts in two stages.
^
Stage 1: Tighten the bolts to 20 Nm (15 Lb-Ft).
^
Stage 2: Tighten the bolts an additional 90 degrees.
