Excursion 4WD V10-6.8L (2002)
PROM - Programmable Read Only Memory: All Technical Service Bulletins
Instruments - 'Wait To Start' Lamp Improper Operation
Article No.
03-4-5
03/03/03
^
DRIVEABILITY - "WAIT TO START" LAMP DOES
NOT OPERATE PROPERLY
^
ELECTRICAL - LAMP - "WAIT TO START" LAMP
DOES NOT OPERATE PROPERLY
FORD:
2002-2003 EXCURSION, SUPER DUTY F SERIES
ISSUE
Some 2002 and 2003 model years 5.4L, 6.8L and 7.3L (only) Super Duty F-Series and Excursion vehicles may exhibit the following conditions:
2002 Model Year
^
5.4L/6.8L applications - "Wait To Start" lamp illuminates and stays on and/or flashes intermittently
^
7.3L applications - "Wait To Start" lamp does not shut off within calibrated time after key-on
^
7.3L applications - "Wait To Start" lamp illuminates while driving and stays on
^
7.3L applications - "Wait To Start" lamp flashes intermittently while driving
2003 Model Year
^
7.3 applications - "Wait To Start" lamp flashes intermittently while driving
This condition refers to the illumination of the "Wait To Start" lamp only and does not affect engine starting and/or engine operation.
ACTION
If one of the listed conditions occurs, the instrument cluster needs to be replaced. Additionally, on some 2002 7.3L applications the powertrain
calibration must also be reprogrammed in order to maintain compatibility between the instrument cluster and powertrain calibration. Refer to the
following Service Procedure for details.
SERVICE PROCEDURE
NOTE
SOME EARLIER LEVEL INSTRUMENT CLUSTERS WHEN USED IN CONJUNCTION WITH LATER LEVEL 7.3L POWERTRAIN
CALIBRATIONS MAY RESULT IN A FALSE P0600 DIAGNOSTIC TROUBLE CODE (DTC) ON F250/F350 WITH CALIFORNIA
POWERTRAIN CALIBRATIONS AND ALL EXCURSIONS, DUE TO UNRELATED ADDITIONAL REVISIONS CONTAINED WITHIN THE
POWERTRAIN CALIBRATION.