Excursion 4WD V10-6.8L (2002)
4
NOTE: Use a crescent wrench on the manual control lever or the outer flats of the manual control lever shaft assembly when installing the
inner manual valve detent lever nut.
Install the inner manual valve detent lever nut.
3. Install filter and seal assembly, fluid pan and gasket.
4. Install the digital Transmission Range (TR) sensor.
1
Position the digital transmission range sensor.
2
Loosely install the bolts.
5. NOTE: Make sure that the manual control lever is in the neutral position.
Using the special tool, align the digital TR sensor. The tool is designed to fit snug.
6. Tighten the bolts.
