Excursion 4WD V10-6.8L (2002)
2. CAUTION: Install a new inline transmission fluid filter (XC3Z-7B155-BA) as part of a transmission overhaul or exchange. If the vehicle was not
equipped with an inline fluid filter, install a new inline transmission fluid filter kit (XC3Z-7B155-AA) according to the instructions supplied with
the kit as part of a transmission overhaul or exchange.
CAUTION: Failure to follow the instructions supplied with the inline transmission fluid filter kit can cause transmission damage.
Verify that the flow arrow on the filter points toward the transmission.
If the vehicle was equipped with an inline fluid filter, install a new inline transmission fluid filter (XC3Z-7B155-BA). If the vehicle was not
equipped with an inline fluid filter, install a new inline transmission fluid filter kit (XC3Z-7B1 55-AA). Carry out the transmission fluid cooler
flow test procedure to verify that there is correct fluid flow through the new inline fluid filter.
3. Position the air deflector and install the bolts.
4. Position the skid plate and install the bolts (4x4 only).
5. Lower the vehicle.
6. Install the upper bolts by inserting a long extension and socket through the front grille and bumper.
