Excursion 4WD V10-6.8L (2002)
Using 205-D055 and 205~153 into the axle
3. Drive the outer pinion bearing cup into the axle housing, using the special tools.
4. Drive the inner pinion bearing cup into the axle housing, using the special tools.
Setting pinion depth
5. CAUTION: Whenever the cups are replaced, the differential pinion bearings must also be replaced.
Make sure the cups are properly seated in their bores.
If a feeler gauge of the specification shown in the illustration can be inserted between a cup and the bottom of its bore at any point around the cup,
the cup is not properly seated.