Excursion 4WD V10-6.8L (2002)
Axle Shaft: Service and Repair
Rear
Dana Model 80 Full-Floating Rear Drive Axle
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly
Removal and Installation
The axle shaft removal procedure is the same for all Dana Full Floating Rear Axles.
The Axle Shaft Assembly
The Axle Shaft Assembly procedures can be found under Differential Assembly. See: Differential Assembly
Removal and Installation
Axle Shaft
Removal
1. NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
Loosen and remove the retaining bolts.
2. Remove the axle shaft.
3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and replace it if required.
Installation