Excursion 4WD V10-6.8L (2002)
5. Disconnect, and remove each fluid cooler tube, as necessary.
6. To install, reverse the removal procedure.
-
Fill the transmission with Motorcraft MERCON Multi-Purpose(ATF) Transmission Fluid XT-2-QDX or equivalent meeting MERCON
specifications.
-
Check for leaks.
Cooler Bypass Valve
Cooler Bypass Valve
Removal
1. Remove, and discard the inline transmission fluid filter, if so equipped.
2. If not done previously, carry out the transmission fluid cooler flow test procedure.
3. Remove the fluid cooler tube from the front cooler line case fitting.
4. Remove the fluid cooler tube from the rear cooler line case fitting.