Excursion 4WD V10-6.8L VIN S (2000)
Hood Latch Release: Service and Repair
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the Powertrain Control Module (PCM); for additional information, refer to Computers and Control Systems.
3. Remove the nuts.
4. lower the hood latch release/park brake bracket and position aside.
5. Disconnect the hood latch release cable.
6. Release the retaining clip from the hood latch release handle to the park brake bracket.
7. Release the return spring and remove the hood release handle.
INSTALLATION
1. To install, reverse the removal procedure.