Excursion 4WD V10-6.8L VIN S (2000)
2. Position the visor out of the way.
3. Position the inside visor secondary blade to access the screws.
4. Remove the screws.
5. Remove the visor.
Installation
1. Follow the removal procedure in reverse order.
Sun Visor
SUN VISOR
Removal and Installation
1. NOTE: Installation of new sun visor gaskets is necessary when the sun visor has been removed.
Remove and discard the screws (36041A32).
2. CAUTION: The sun visor gasket adhesive is extremely strong. Be sure to use adequate amount of force to remove the sun visor from the
vehicle.
Remove the sun visor (3604118) from the vehicle, then disconnect the electrical connector.
