Excursion 4WD V10-6.8L VIN S (2000)
Power Seat Motor: Service and Repair
REMOVAL
1. Remove the seat. For additional information, refer to Seat-Captain's Chair.
2. Remove the seat track. For additional information, refer to Seat-Captain's Chair.
3. Remove the seat motor retaining bolts.
4. Remove the seat motor(s).
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: When installing the new motor, the inductive contacts must be depressed before the motor can be installed on the wire harness bracket.
2. Check the restraint system for correct operation.