Excursion 4WD V10-6.8L VIN S (2000)
10. Remove the cable tensioner.
1
Unclip the locking tabs.
2
Remove the spring tensioner.
11. Remove the cable from four clips (two shown).
INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
Second Row, Left Side
REMOVAL
1. Remove the seat. For additional information, refer to Powertrain Management Seat-Excursion, Second Row.
2. Remove the seat backrest. For additional information, refer to Rear Seat Backrest-Excursion Second Row, 60/40.
3. Unclip the J-clips.
