Excursion 4WD V10-6.8L VIN S (2000)
1. CAUTION: Use care not to get dirt in the front hub.
Note: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mile) or more to relearn the strategy.
To install, reverse the removal procedure.
-
Install a new front anti-lock brake sensor bolt.
Sensor, Rear
Removal
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. CAUTION: Clean off dirt and debris that may have collected around the rear antilock brake sensor before removal to prevent fluid