Excursion 4WD V10-6.8L VIN S (2000)
1. Position the rear disc brake caliper anchor plate. Install the bolts.
F-450/550, Motorhome, with rear-of-axle brake calipers
2. Position the rear disc brake caliper anchor plate. Install the bolts.
F-450/550, Motorhome, with forward-of-axle brake calipers
3. Position the rear disc brake caliper anchor plate. Install the bolts.
-
Tighten the bolts in the sequence shown in three stages.
-
Stage 1: Tighten bolt 1 to 400 Nm (295 lb-ft).
-
Stage 2: Using a suitable crowfoot socket, tighten bolt 2 to 136 Nm (100 lb-ft).
-
Stage 3: Mark the rear disc brake caliper anchor plate and bolt 2. Tighten bolt 2 an additional 1/8 to 1/4 turn.
All vehicles
4. Install the brake pads.
Rear Disc Brake Adapter
Removal
1. Remove the rear disc brake caliper anchor plate.
2. Remove the hub and rotor.