Excursion 4WD V10-6.8L VIN S (2000)
4. CAUTION: Use care not to damage the bleeder screw or front disc brake rotor shield.
Install the disc brake caliper.
1
Install the disc brake caliper.
2
Install the disc brake caliper pin bolts.
5. Install the wheel and tire assembly.
6. Lower the vehicle.
7. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3
fluid meeting Ford specification ESA-M6C25-A. Install the brake master cylinder filler cap.
8. Inspect brake operation.