Excursion 4WD V10-6.8L VIN S (2000)
Brake Rotor/Disc: Service and Repair
Rear
Rear Disc
Removal and Installation
All except Ford single rear wheel axle
1. NOTE: The brake disc is part of the wheel hub on all axles except the Ford 10.50-inch axle for single rear wheel applications. Removal of the hub
on a Dana or Ford axle refer to: "Steering and Suspension / Suspension, Wheel Hub" See: Maintenance/Wheels and Tires/Wheel Hub
Remove the Hub.
2. Remove the rotor-to-hub bolts and separate the hub and rear disc brake rotor.
Ford Single Rear Wheel Axle
3. Remove and support the caliper and anchor plate assembly. Remove the anchor plate bolts.
All Vehicles
4. Remove the disc.
5. To install, reverse the removal procedure.
