Excursion 4WD V10-6.8L VIN S (2000)
Heater Core: Service and Repair
Main Climate Control
REMOVAL
NOTE: If a heater core leak is suspected, the heater core must be leak-tested before it is removed from the vehicle. See: Heating and Air
Conditioning/Testing and Inspection
1. Drain the radiator; refer to Cooling System. See: Service and Repair
2. Disconnect the heater water hoses from the heater core. For the heater hose coupling disconnect and connect procedure, refer to Heating and Air
Conditioning. See: Heater Hose/Service and Repair
3. Disengage the stops and lower the glove compartment door.
4. Remove the electronic blend door actuator and bracket assembly.
1
Remove the screw.
2
Rotate the blend door actuator and bracket assembly.
3
Remove the electronic blend door actuator and bracket assembly.
5. Remove the screws.