Excursion 4WD V10-6.8L VIN S (2000)
NOTE: Auxiliary climate control heater control valve is shown, non-auxiliary heater control valve is similar.
6. Release the clamp and disconnect the heater hose from the heater outlet hose.
7. Disconnect the heater hose couplings from the underbody auxiliary heater.
8. Disconnect the heater inlet and outlet hose couplings from the heater core.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the coolant hoses with Rubber Suspension Insulator Lube E25Y-19553-A or equivalent meeting Ford specification
ESF-M99B112-A.
