Excursion 4WD V10-6.8L VIN S (2000)
14. If equipped, install the EVR solenoid bracket.
^
Position the bracket.
^
Install the bolts.
15. Note: The idle air control valve is shown removed for clarity.
Install the throttle body adapter.
^
Position a new throttle body adapter gasket.
^
Position the throttle body adapter.
^
Install four bolts and tighten in two stages.
^
Stage 1: Tighten to 8-10 Nm (71-88 inch lbs.).
^
Stage 2: Tighten an additional 85-95 degrees.
16. Note: The EGR valve is shown removed for clarity.
If equipped, connect the EVR solenoid vacuum and electrical connectors.
