Excursion 4WD V10-6.8L VIN S (2000)
4. To remove a broken A/C evaporator core orifice; screw the end of the Throttle Remover into the broken A/C evaporator core orifice.
5. Hold the tool T-handle stationary and rotate the tool body to remove the broken A/C evaporator. core orifice.
INSTALLATION
1. Lubricate and install the O-ring seals on the A/C evaporator core orifice.
^
Use PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-l2-C) or equivalent meeting Ford specification
WSH-M1C231-B.
2. Place the A/C evaporator core orifice into the Fixed Orifice Tube Tool.
3. Insert the A/C evaporator core orifice into the A/C evaporator core inlet tube until seated.
4. Remove the Fixed Orifice Tube Tool.
5. Install the condenser to evaporator tube; refer to Condenser to Evaporator Line.
