Excursion 4WD V10-6.8L VIN S (2000)
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraint system for correct operation.
Front Row
Safety Belt Bolt Bit
SPECIAL SERVICE TOOL(S)
REMOVAL
1. Remove the shoulder strap guide.
1
Position the shoulder strap guide cover up.
2
Remove the shoulder strap guide nut.
3
Remove the shoulder strap guide.
2. Remove the front door scuff plate, the rear door scuff plate, the rear assist handle and the center body pillar trim panel.