Excursion 4WD V10-6.8L VIN S (2000)
9. Remove the second row safety belt anchor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt anchor.
10. Remove the third row safety belt anchor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt anchor.
11. Pull out where indicated on the second row safety belt guide cover and open.
12. Remove the second row safety belt guide.
1
Remove the nut.
2
Remove the safety belt guide.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
