Excursion 4WD V10-6.8L VIN S (2000)
18. Install the second and third row seat belt guide inserts into the quarter trim panel.
19. Install the third row seat.
20. Readjust the second row seat.
21. Check the restraints system for correct operation.
Passenger's Side
Safety Belt Bolt Bit
SPECIAL SERVICE TOOL(S)
REMOVAL
NOTE: New safety belt buckles, height adjusters, center adjust tongues and belts and retractors can be installed separately. However, if a safety belt
assembly was in use during a collision, a new belt and retractor must be installed as well as the center adjust tongue and belt and buckle assembly or the
center adjust tongue and the cable and buckle assembly. When installing new safety belts and buckles, height adjusters, safety cables and buckles, center
adjust tongues and belt and retractors, use only the parts specified in the Ford Master Parts Catalogs for the make and model of the vehicle being
repaired. Safety belt assemblies must not be interchanged between vehicle models.
1. Adjust the second row seat to its most forward position.
2. Remove the third row seat.
3. Remove the second and third row seat belt guide panel inserts.