Excursion 4WD V10-6.8L VIN S (2000)
19. Remove the pin-type retainers and remove the duct.
Second row retractor only
20. Remove the second row safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the second row safety belt retractor.
Third row retractor only
21. Remove the third row safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the third row safety belt retractor.
INSTALLATION
Third row retractor only
1. Install the third row safety belt retractor.
1
Position the third row safety belt retractor to the body.
2
Using the special tool 501-010 (T77L-2100-A), install the bolt.
CAUTION: Do not remove the shipping clip until the safety belt guide is secured in position. Allowing the safety belt to be retracted further into
the safety belt retractor may cause the safety belt retractor to lock and not release the safety belt.
Second row retractor only
