Excursion 4WD V10-6.8L VIN S (2000)
Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure Cut-Off Switch - 5.4L, 6.8L and 7.3L
PRESSURE CUT-OFF SWITCH - 5.4L, 6.8L AND 7.3L
REMOVAL
1. Disconnect the electrical connector.
2. Remove the pressure cut-off switch.
INSTALLATION
1. Follow the removal procedure in reverse order.
^
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R- 134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
