Excursion 4WD V10-6.8L VIN S (2000)
DOR/COR Number 50223 identifies parts ordered for this campaign through the Recall Hotline.
DEALER PRICE
For latest prices, refer to:
^
DOES II
^
Updated Price Book
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
SERVICE PROCEDURE
NOTE:
There are two (2) styles of headlamp switches depending on if the vehicle is equipped with or without fog lamps.
1.
For non-fog lamp equipped vehicles position the headlamp switch in the OFF position. For fog lamp equipped vehicles position the headlamp
switch in the headlamp ON position and pull the knob out into the fog lamp ON position.
CAUTION
To avoid possible damage to the headlamp switch bezel, use a piece of cardboard, or similar material, placed between the bezel and the tool.
2.
Insert a pocket screwdriver, or similar tool, in through the opening on the bottom of the headlamp switch knob and depress the release tab inside,
then remove the knob. See Figures 1 and 2.