Excursion 4WD V10-6.8L VIN S (2000)
2. Check the toe-in and clear vision settings.
Tie Rod End - Outer, LH, F-250, F-350, 4x4, and F-450, F-550
Tie Rod End - Outer, LH, F-250, F-350, 4x4, and F-450, F-550
Special Tool(s)
Special Service Tool(s)
Removal
Note: Replace the tie rod end if the ball stud is loose in the socket or the tie rod end is bent. Replace the front suspension steering ball stud dust seal if
any nicks, cuts or tears are present. Do not attempt to straighten a bent tie rod end.
1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle.
2. Remove the wheel.
3. Loosen the adjusting sleeve clamp.