Excursion 4WD V10-6.8L VIN S (2000)
6. Install the outer bearing cone and roller assembly and the flatwasher on the spindle.
7. Install the adjusting nut, refer to Wheel Bearing Adjustment - Motorhome for final bearing adjustment. Install a new cotter pin.
8. Install a new gasket and the hub cap.
9. Install the front disc brake caliper and rotor.
10. Install the front wheel and tire assemblies.
11. Lower the vehicle.
Wheel Hub and Bearing - F-250, F-350, F-450, F-550 4WD
The front wheel bearing and hub are serviced as one unit. For repair of the front wheel bearing and hub refer to Wheel Hub / Service and Repair. See:
Wheel Hub/Service and Repair
