Excursion 4WD V10-6.8L VIN S (2000)
Wheel Hub: Service and Repair
Front
Removal
All Vehicles
1. Remove the front brake disc.
2. Remove the hub lock.
1
Remove the retainer ring.
2
Pull outward and remove the hub lock.
3. Remove the axle shaft thrust washers.
1
Remove the snap ring.
2
Remove the three thrust washers.
Vehicles Equipped With ABS
4. CAUTION: Do not remove the ABS sensor from the bearing.
Disconnect the ABS wheel sensor harness.
1
Disconnect the connector.
2
Disconnect the harness routing clips.
All vehicles