Excursion 4WD V10-6.8L VIN S (2000)
3. Position the ABS sensor and install the bolt.
All vehicles
4. Position the brake disc shield.
5. Note: Apply a coat of Ford High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A meeting Ford specification
ESA-M1C198-A to the O-ring area of the wheel hub and bearing before installing the hub and bearing.
Install the wheel hub and bearing.
1
Position the wheel hub and bearing.
2
Install the four lock nuts.
Vehicle equipped with ABS
6. Note: The following step applies only to vehicles equipped with ABS.
