Excursion 4WD V10-6.8L VIN S (2000)
1. Prelubricate each clutch disc and soak the clutch friction plate for at least 15 minutes in Additive Friction Modifier C8AZ-1913546-A or
equivalent meeting Ford specification EST-M2C118-A.
2. CAUTION: Do not mix the differential clutch packs or shims from one side with the other.
Note: The Belleville spring is a dished plate.
Assemble the differential clutch packs (without the shims and Belleville springs) on the respective differential side gears.
3. Note: Use the Traction-Lok Clutch Gauge Mandrel for the procedure.
Clamp the bolt head of the Traction-Lok Clutch Gauge in a vise.
^
Install the differential clutch pack and the differential side gear (without the shim or the Belleville spring) on the gauge.
4. Position the Traction-Lok Clutch Gauge disc on top of the differential clutch pack.